Telnet with no user accounts
A tech from an earlier time.
- No encryption
- No user accounts
- Requires two passwords
- Line password
- Enable password
Applying aaa new-model will immediately remove the login lines, breaking login.
Tested on IOSv, Version 15.9(3)M8.
Config
This is the minimum to get this feature working.
!
! Defaults to off, just a reminder it needs to be off.
!
no aaa new-model
!
! Put a password here, or enable will not work
!
! Can also use enable secret
!
enable password Cisco123
!
! I didn't want to configure an IP.
!
! The device needs an IP for Telnet to work.
!
interface GigabitEthernet0/0
ip address dhcp hostname r2-aaa
!
! Each set of vty lines require three things:
!
! 1. login
! 2. password
! 3. transport method
!
line vty 0 4
password Cisco123
login
transport input telnet
line vty 5 15
password Cisco123
login
transport input telnet